Sustained service levels produce healthy relationships

2015-08-12 - Proven Protection: ABB’s MNS Low Voltage Switchgear ensures years of smooth operation for specific Sasol Synfuels plants in Secunda, with a combination of superior technology and customer-focused service.

It takes time for a system to prove itself. Low voltage (LV) switchgear equipment may conform to all the current IEC standards and have been subject to the most rigorous testing, but it is only in the daily usage over a period of time that the true value of the design and control parameters of such equipment becomes evident. It is only in real-life and real-time that all the promises of safety and reliability can be truly put to the test.

A typical MNS configuration for an advanced motor control centre (MCC).

Time for a change
Sasol’s Secunda Synfuels Operations is now realising the benefits of its decision to migrate certain plants to ABB’s MNS LV switchgear more than twenty years ago. The transition to new switchgear was essential for the petrochemical facility as the existent equipment, sourced from a wide range of suppliers, installed in the late 1970s, was due for modernisation.

“The problem was that the ‘old’ system just could not match the very harsh conditions at the Secunda plant; it had a single point of failure and no built-in redundancy. Fault-finding was a major challenge,” says Leigh Visser, Senior Foreman at Sasol Synfuels Outside Ash and Water division. “We chose ABB’s MNS product range for inclusion in the group of preferred solutions as the requirement is for switchgear products suited to the harsh conditions on the plant: both in terms of dust ingress and heat, as well as meet safety requirements,” says Visser.

Pushing the boundaries in safety technology
As someone who has been tasked to maintain and oversee the distribution and breaker switching at his division for a decade and a twenty-year career with Sasol, Visser is only too familiar with the challenges of working with energized equipment;
the risks inherent in fault-finding meant that there was always a chance that something could go wrong.

MNS LV switchgear features enhanced operator safety features that includes the ability to rack out and rack in without having to open the door. Added to this are separate compartments for controls and power cables, and internal arc fault containment.
The only operator protection in older technologies was provided by very cumbersome arc flash personal protection equipment (PPE) when working with the switchgear. This equipment is not only uncomfortable, but limited the operator’s mobility and visibility.
“We are still in the process of replacing panels, to ensure the second level of protection,” he says.

Due to Sasol-specific requirements, Sagren Nair, Chief Technologist at Sasol Group Technology was involved in the design, concept and commissioning of technology for Sasol, as well as the quality assurance/quality control of equipment, and Nair himself has been closely involved with MNS switchgear since 1996.

MNS contributes to a safe maintenance environment.

Walking the extra mile
In the waste water environment at Sasol Secunda, Nair explains, there was a high risk of arc-flashes dropper bus bars which has been eliminated by the multi-function separation of the MNS design. “With MNS each bus bar is segregated from the other - which means significantly increased safety as well as ease of maintenance.

“The safety of our people is not negotiable,” he continues. “The built-in enhanced operator safety and arc-proof design has made a significant contribution to the excellent safety record for the Secunda Waste Water facility.”

Put to the test
Early in January 2015, ABB MNS LV switchgear was put through an unexpected test when there was an incident in one of Sasol Secunda’s substations. Albert Pretorius, Chief Electrical Technologist at Sasol Synfuel’s test department, who has extensive working experience with ABB MNS in the steam plant environment, explains: “There was a rupturing fault inside the tier isolator causing the board’s incomer to trip. Thanks to the monitoring system of MNS the fault was quickly picked up and we could take immediate action. Not only that, but the problem was contained and limited to the point of ignition only.”

The design of ABB MNS features the withdrawal of modules and contacts, allowing for targeted maintenance on a problem area without having to shut off the entire system. The net result is minimal downtime. “The board was back up and running within 24 hours, where, without MNS, it would have taken two to three days,” says Pretorius.

For Pretorius, the ability for a switchgear system to withstand the harsh, high-risk conditions of the petrochemical industry was paramount for Sasol Synfuel’s requirements. The risk of explosions in the steam plant environment, for example, exists because of the very fine wet-and-dry coal dust present in the atmosphere, he notes.

“It is critical that the switchgear is able to withstand the harshest environment and operational conditions. We have had an ABB MNS board at the steam plant since 2000 with only one rupturing fault, and no injuries.”

Easy does it
As an end-user, Visser highlights the user-friendliness of MNS, something that both he and his artisans experience on a daily basis. He describes the racking out process as easy and smooth, in comparison to the old system, where the panels were bulky, which made maintenance on the panels cumbersome.

“The simple layout of the MNS panels makes it easy to maintain and replace components. It has also been designed in such a way that it does not allow mistakes, with the added feature of having access to all components from the front of the switchgear.”

The MNS system is a very easy board to work on; and the installation and maintenance is a team effort - everyone is familiar with it,” Pretorius says. “The beauty is, once it is installed, nothing changes – the only training necessary is in control, protection and metering of the board. It certainly has made my job easier.”

A design in evolution
Since MNS was introduced in the early 1970’s, the basic design and construction of the system have remained unchanged. However, ABB’s highly proactive research and development (R&D) division has ensured a steady evolution in reliability, availability, maintainability and safety (referred to as ‘RAMS’), and modifications and extensions can be added or retrofitted to existing switchgear installations.

“There have been constant improvements over the years which have allowed us to either retrofit items, or install new modules,” says Visser. In late 2014, ABB organised a special seminar on MNS, presented by ABB Australia’s David Stonebridge and local ABB MNS proponent, Avi Ramdhin. Stonebridge, with over 45 years’ experience of LV switchgear, has been at the forefront of testing and development of MNS technology for ABB globally. Pretorius agrees that there is always more to learn when it comes to LV switchgear and the seminar deepened his understanding of the value and power of MNS.

The seminar, for Nair, was an example of how ABB invests in knowledge-sharing and building relationships with its customers. “In an industry such as petrochemicals, safety on the plant is key and that a safe board must contribute to reducing downtime and injuries, as well productivity losses.”

MNS is used throughout the world for protection and control in Petrochemical applications.

Intelligent choices pay off
With an ABB satellite facility based in Secunda, on-site support and service is never far away. “Product support has made a big difference,” notes Visser. “We appreciate how flexible ABB is in providing the right equipment and back-up support to suit individual scenarios. Component replacement is furthermore quick and efficient.

“In addition, the system provides lots of information which gives a whole new level of control. The diagnostics capability on the board gives the operator valuable feedback on which enables us to be proactive about maintenance, not reactive,” says Visser.

Nair also highlights the value of ‘intelligent’ switchgear and how it is aligned to Sasol’s business culture and way of thinking.

“The on-line, real-time monitoring of the process plant with MNS provides increased information and data which is invaluable for accurate decision-making. ABB LV switchgear provides the ultimate combination of safety, comfort and peace of mind. It has proven itself over time and fulfils all our requirements.”

About ABB
ABB (www.abb.com) is a leader in power and automation technologies that enable utility, industry, and transport and infrastructure customers to improve their performance while lowering environmental impact. The ABB Group of companies operates in roughly 100 countries and employs about 140,000 people.

The Low Voltage Products and Systems division manufactures low-voltage circuit breakers, switches, control products, wiring accessories, enclosures, motor control centres and cable systems to protect people, installations and electronic equipment from electrical overload. The division further makes KNX systems that integrate and automate a building's electrical installations, ventilation systems, and security and data communication networks.

For any additional information please contact.

Paul Louw
Marketing Manager LP Division
ABB South Africa (Pty) Ltd
Phone: +27 10 202 5916
email: paul.louw@za.abb.com

    •   Cancel
      • Twitter
      • Facebook
      • LinkedIn
      • Weibo
      • Print
      • Email
    •   Cancel

    Contact us

    Page information:
    • Low Voltage Media Relations
      Paul Louw
      Phone: +27 10 202 5916

      ABB South Africa (Pty) Ltd
      ABB Campus, 2 Lake Rd,
      Longmeadow Business Estate (N),
      Modderfontein, 1609
    seitp202 b4bed4e533b0eebfc1257e9e0048fd41