Line Differential Protection and Control RED615

RED615 is available with three alternative standard configurations.

Standard configuration A

RED615 Protection function overview<br>Configuration A<br>6-Jun-2009<br>RED615_Std_conf_A.jpg

Click the image to enlarge it



Standard configuration B
RED615 Protection function overview<br>Configuration B<br>6-Jun-2009<br>RED615_Std_conf_B.jpg

Click the image to enlarge it



Standard configuration C
RED615 Protection function overview<br>Configuration C<br>6-Jun-2009<br>RED615_Std_conf_C.jpg

Click the image to enlarge it



Standard configuration functionality

DescriptionStd.conf.
Line differential protectionA
Line differential protection with directional earthfault protectionB
Line differential protection with non-directional earth-fault protectionC

ABC
Protection
Line differential protection and related measurements, stabilized and instantaneous stages
Three-phase non-directional overcurrent protection, low stage, instance 1
Three-phase non-directional overcurrent protection, high stage, instance 1
Three-phase non-directional overcurrent protection, high stage, instance 2
Three-phase non-directional overcurrent protection, instantaneous stage, instance 1
Non-directional earth-fault protection, low stage (SEF), instance 1--
Non-directional earth-fault protection, low stage, instance 2--
Non-directional earth-fault protection, high stage, instance 1--
Non-directional earth-fault protection, instantaneous stage--
Directional earth-fault protection, low stage (SEF), instance 1--
Directional earth-fault protection, low stage, instance 2--
Directional earth-fault protection, high stage--
Transient / intermittent earth-fault protection--
Non-directional (cross-country) earth fault protection, using calculated I0--
Negative-sequence overcurrent protection, instance 1
Negative-sequence overcurrent protection, instance 2
Phase discontinuity protection-
Three-phase thermal protection for feeders, cables and distribution transformers-
Binary signal transfer
Circuit breaker failure protection
Three-phase inrush detector
Master trip, instance 1
Master trip, instance 2
Control
Circuit breaker control with interlocking
Disconnector position indication, instance 1
Disconnector position indication, instance 2
Disconnector position indication, instance 3
Earthing switch indication
Auto-reclosing-oo
Supervision and Monitoring
Circuit breaker condition monitoring-
Trip-circuit supervision, instance 1
Trip-circuit supervision, instance 2
Current circuit supervision
Protection communication supervision
Measurement
Disturbance recorder
Three-phase current measurement
Sequence current components
Residual current measurement-
Residual voltage measurement--

• = Included, o = Optional at the time of the order
Note, all directional protection functions can also be used in non-directional mode



  • Rate this page
      Cancel
  • E-mail this page
      Cancel

Your preferences:

db0003db004281 207b10566a2a8e1ec12574d600368370