 | FXE4000-DE21/-DE23
(COPA-XE / MAG-XE) | | FXE4000-DE41/-DE43
(COPA-XE / MAG-XE) | | FXE4000-DE47/-DE48
(COPA-XE / MAG-XE) |
| | | | | |
| | | | | |
| Applications | Hygienic design for food- and pharmaceutical industries | | Cost-effective flowmeter system for water and waste water service | | Explosion proof design for the chemical industry |
| | | | | |
| Meter sizes | DN 3 - 100
1/8" - 4" | | DN 3-1000 (1/8“-40“), Flange design per DIN/ANSI | | DN3-1000 (1/8“-40“), Flange design per DIN/ANSI |
| | | | | |
| Accuracy | 0,5 % of rate,
0,25% of rate (Option) | | 0,5 % of rate,
0,25% of rate (Option) | | 0,5 % of rate,
0,25% of rate (Option) |
| | | | | |
| Signals |
Current output 0/4…20mA
Pulse output: passive or active, switchable
Configurable contact output/input | |
Current output 0/4…20mA
Pulse output: passive or active, switchable
Configurable contact output/input | |
Current output 0/4…20mA active or 4…20mA passive
Pulse output: passive or active, switchable
Configurable contact output/input |
| | | | | |
| Communication | HART-Protocol
PROFIBUS-PA or -DP
FOUNDATION Fieldbus | | HART-Protocol
PROFIBUS-PA or -DP
FOUNDATION Fieldbus | | HART-Protocol
PROFIBUS-PA or -DP
FOUNDATION Fieldbus |
| | | | | |
| Certificates | 3A approval, FDA approval, EHEDG | | 3A approval, FDA approval, EHEDG | | Ex-Design according to ATEX , Dust Ignition Proof |
| | | | | |
| Description | The basic flowmeter primary body can be adapted to the existing connection types using threaded adapters such as Weld stubs, Pipe couplings per DIN 11851, Tri-Clamp per DIN 32676, Male threaded. The meter is available in wafer and flanged designs per DIN, ANSI or JIS standards too. | | The modular design of the flowmeter provides you with an instrument for your applications. You only pay for what you actually require – a tailor made solution.
Remote Converter with various housings such as field mount housing, rail mount housing, 19” plug-in, panel mount housing available. | | Three design variations are available to satisfy a wide spectrum of requirements:
The compact design flowmeter (COPA-XE). The flowmeter with a separate converter, which can be installed in the Ex-Zone (COPA-XE remote). The flowmeter with a separate converter, which is installed outside of the Ex-Zone (MAG-XE). |
| | | | | |