Legacy software tools
| Life cycle status for legacy software tools | Find information and services about legacy software tools according to the status of your drives in classic phase.
|
| DriveWindow | DriveWindow is an easy to use software tool designed to support the drive’s life cycle from startup and monitoring, to backup, and performance tuning. DriveWindow is designed for use with ABB’s low and medium voltage industrial drives.
ACS800, ACS600, DCS800, DCS600, ACS1000 and ACS6000 drives are supported.
|
| DriveWindow Light | DriveWindow is an easy to use software tool used throughout the drive’s life cycle for startup, monitoring, and performance tuning.
ACS140, ACS160,ACS310, ACS320, ACB330, ACS350, ACS355, ACS400, ACH400, ACS510, ACB530, DCS400, DCS550, DCS800, ACS600, ACS800, ACS550, ACH550 drives are supported.
|
| DriveStudio | DriveStudio is an easy to use software tool designed for use throughout a drive’s life cycle from startup, monitoring, to performance tuning.
ACSM1, ACS850 and ACQ810 drives are supported.
|
| Drive Manager | Drive Manager for SIMATIC (DM4S-01) is a plug-in device tool that can be easily installed into the STEP 7 and TIA Portal. It utilizes the TCI interface of the SIMATIC PLC to communicate with the drives connected to PROFIBUS or PROFINET network.
ACS880 primary (v2.90.0.0), ACS580 standard (v2.06.0.2), and ACS380 machin-ery (v2.08.0.7) drive firmware’s are supported. FPNO-21 FW V1.02 or newer, FENA-11, FENA-21 FW 3.03 or newer, FPBA-01 FW V3.0 or newer ABB Drive fieldbus adapters are supported. Only following Step 7 engineering tools are validated: SIMATIC Manager V5.4 and V5.5 and TIA Portal V11, V13, V14, V15 and V15.1
Drive Manager for SIMATIC device tool Flyer |
| DriveAP | DriveAP is a PC-based programming tool for creating, documenting, editing, and downloading Adaptive Programs as well as Multi Block Programming Applications (MBPA). It is a user-friendly tool to modify function blocks and their connections. No special programming skills are required; basic knowledge of block programming is enough.
ACS800 drives are supported.
|
| DriveSPC / DriveSPC Pro | DriveSPC (Solution Program Composer) is a Windows-based tool for Solution Programming. It can be used without a drive or with one or more drives.
ACSM1, ACS850 and ACQ810 drives are supported.
DriveSPC Solution Program Composer User Manual |
| DriveBrowser | DriveBrowser is an Ethernet network-based drive monitoring and tuning PC tool supporting low voltage machinery, standard, and industrial drives throughout their life cycle. It helps users monitor, maintain, and set drive parameters on drives connected to an Ethernet network.
|
| DrivePM | DrivePM (Drive Parameter Manager) is a PC tool for creating and editing parameter sets for ACS150,
ACS310, ACS320, ACS350, ACS355, ACS550 and ACH550. These can be transferred between PC and FlashDrop, and template files or firmware updates can be transferred to FlashDrop.
|
| DriveConfig | The DriveConfig kit is a drive configuration tool for ABB drives, ACS55, offering fast and safe configuration of unpowered drives. It enables parameter setting and software updating without a power connection. Drives can remain in their delivery boxes during configuration.
|
| DriveAnalyzer | DriveAnalyzer is a software tool to analyze how an ACS800 frequency converter is running, how the motor is utilized, and the nature of the mechanical load at the motor shaft. It collects data, analyses it, and produces graphs and reports.
DriveAnalyzer life cycle announcement |
| DriveDebug | Diagnostics tool for DDCS communication protocol drives, including ACS600 and ACS800.
|